Diacell® µScopeDAC-HT(G) Plus
Raman and FTIR µSpectroscopy, Pmax = 50 GPa, Tmax = 900 K, WD = 12 mm, A = 100°
Diacell μScopeDAC Series
- The Diacell® μScopeDAC-HT(G) Plus is fitted with asymmetrical Boehler-Almax diamond anvils design which enable a dual large aperture for X-ray and optical measurements
- Maximum pressures of up to above 50 GPa are obtained with the Diacell® μScopeDAC-HT(G) Plus
- Fitted with type IIas ultra-low fluorescence & ultra-low birefringence diamond anvils the cell is ideal for Infrared and Raman microscopic sample analysis
- The DAC is equipped with an internal compact gasket heater that enables research up to 900 K
- The gas membrane is particularly suitable for high-temperature operation as it is easy to compensate for any pressure change due to heating
Description
The Diacell® μScopeDAC-HT(G) Plus, gas membrane driven, high-temperature, diamond anvil cell, meets the growing need to reach very high pressures and be compatible with the optical and physical constraints of microscopes. It is suitable for optical work under FTIR and Raman microscopes and has an internal gasket heater that operates to 900 K. The cell is supplied fitted with a K-type thermocouple and is suitable for water cooling.
The μScopeDAC-HT(G) Plus is only 23 mm in height and with a 12 mm working distance. Fitted with asymmetrical Boehler-Almax design diamond anvils this DAC provides the user with large opening angles. By using a 4.2 mm diameter anvil the top opening is 95° for both Optical and X-ray experiments. The bottom part is fitted with a 2.5 mm diameter anvil, that will still keep the advantage of a large optical aperture (100°) but is narrowing the X-ray aperture to 41°.
Due to its small physical dimensions, the Diacell® μScopeDAC-HT(G) Plus is compatible with most, if not all, commercial Raman and FTIR systems.
Applications
A large and increasing percentage of optical and spectroscopic observations is now made using microscopes. In particular, Raman instruments are commonly sold with integral microscopes to enable efficient scattered light collection, as well as to permit Raman mapping of complex samples. Similarly, FTIR spectrometers are often supplied with reflecting (Cassegrain) microscopes. The Diacell® μScopeDAC-HT(G) Plus is particularly suited for such applications.
Specifications
| Cell Material | AISI 440C |
| Anvil Support Plate | Tungsten Carbide |
| Pressure Mechanism | Gas Membrane |
| Maximum Pressure | 50 GPa |
| Temperature Range | 900 K |
| Top Angle | Conical 95º |
| Bottom Angle | Conical 100º (Optical), 41° (X-ray) |
| Lateral Access | N/A |
| Heating | Internal gasket heater |
| Cooling | Water cooled |
| DAC Diameter | 60 mm |
| DAC Height | 23 mm |
| Working Distance to Sample | 12 mm |
| Numerical Aperture | 0.74 |
| DAC Weight | TBC |
Maximum pressure is dependent upon the culet size of the anvils. Almax easyLab is committed to its policy of continuous improvement. Specifications may change without notice. easyLab and Diacell are registered trademarks of Almax easyLab.
Documents
We have compiled a series of technical documents (brochures, articles, technical drawings, …) which you might find useful to help you understand this product better.
Technical documentation
Brochure uScopeDAC-HT(G) Plus
Technical Drawing
Please contact us for further details on the engineering drawings.
Spares, Accessories and Options
Our diamond anvil cells are aligned and mechanically tested before leaving our factory on their way to your laboratory.
They also come supplied with the required basic tooling, including gasket blanks, to use them. All is contained in the transportation casing to move around laboratories easily.
Below you can find some of the accessories and spares you might also consider. If you cannot find what you need, please do not hesitate to contact our team.
 |
Diamond Anvils 2.5 mm Boehler Almax design diamond anvil Product code: [P01207] |
|
Diamond Anvils 4.2 mm Boehler Almax design diamond anvils Product code: [P01202] |
 |
Anvil Support Plate Tungsten carbide (H10F) Conical 100°, 14mm Product code: [P01212] |
|
Anvil Support Plate Tungsten carbide (H10F) Conical 95°, 14mm Product code: [P01211] |
 |
Gasket Heater Gasket heater suitable for the μScopeDAC-HT(G) Plus Product code: [TBC] |
 |
Gas Membrane Gas membrane suitable for the Diacell® μScopeDAC-HT(G) Plus Product code: [A76040] |
 |
Programmable Power Supply PS-03- Keithley/Temperature Reader including Labview based program Product code: [A75060] |
 |
Gasket Blanks 10 mm diameter / 0.26 mm thick Inconel gasket blanks Product code: [P02214] |
Share this product on:
'%3e%3cg id='Final-Copy-2_2_' transform='translate(1275.000000, 200.000000)'%3e%3cpath class='st0' d='M7.4,12.8h6.8l3.1-11.6H7.4C4.2,1.2,1.6,3.8,1.6,7S4.2,12.8,7.4,12.8z'/%3e%3c/g%3e%3c/g%3e%3c/g%3e%3cg id='final---dec.11-2020'%3e%3cg id='_x30_208-our-toggle' transform='translate(-1275.000000, -200.000000)'%3e%3cg id='Final-Copy-2' transform='translate(1275.000000, 200.000000)'%3e%3cpath class='st1' d='M22.6,0H7.4c-3.9,0-7,3.1-7,7s3.1,7,7,7h15.2c3.9,0,7-3.1,7-7S26.4,0,22.6,0z M1.6,7c0-3.2,2.6-5.8,5.8-5.8 h9.9l-3.1,11.6H7.4C4.2,12.8,1.6,10.2,1.6,7z'/%3e%3cpath id='x' class='st2' d='M24.6,4c0.2,0.2,0.2,0.6,0,0.8l0,0L22.5,7l2.2,2.2c0.2,0.2,0.2,0.6,0,0.8c-0.2,0.2-0.6,0.2-0.8,0 l0,0l-2.2-2.2L19.5,10c-0.2,0.2-0.6,0.2-0.8,0c-0.2-0.2-0.2-0.6,0-0.8l0,0L20.8,7l-2.2-2.2c-0.2-0.2-0.2-0.6,0-0.8 c0.2-0.2,0.6-0.2,0.8,0l0,0l2.2,2.2L23.8,4C24,3.8,24.4,3.8,24.6,4z'/%3e%3cpath id='y' class='st3' d='M12.7,4.1c0.2,0.2,0.3,0.6,0.1,0.8l0,0L8.6,9.8C8.5,9.9,8.4,10,8.3,10c-0.2,0.1-0.5,0.1-0.7-0.1l0,0 L5.4,7.7c-0.2-0.2-0.2-0.6,0-0.8c0.2-0.2,0.6-0.2,0.8,0l0,0L8,8.6l3.8-4.5C12,3.9,12.4,3.9,12.7,4.1z'/%3e%3c/g%3e%3c/g%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Your Privacy Choices
Reviews
There are no reviews yet.