Diacell® Gasket Indenter

Gasket pre-indentation tool
  • Gasket indentation using WC anvils
  • One pair of WC anvils with a culet size (of your choice) is supplied with the system
  • Additional WC anvils may be ordered separately. Available culet sizes from 0.20 mm to 0.90 mm

SKU: A83000

For more info, quotation or call: Contact us


By mimicking a conventional piston-cylinder diamond anvil cell, the Diacell Gasket Indenter enables the indentation of gaskets without risking the precious diamond anvils.

The Diacell Gasket Indenter uses tungsten carbide anvils (WC).  The dies design are matching the diamond anvil design. The available dies are:

  • WC Anvil for Conical Boehler-Almax X=3.30 mm / 85  Design
  • WC Anvil for Diacell X= 2.50 mm Design
  • WC Anvil for Diacell X= 3.10 mm Design

The Diacell Gasket Indenter is supplied with a pair of dies of your choice. Additional WC anvils may be ordered separately.  Current culet sizes available are from 0.20 up to 0.90 mm.  If you need a specific size please get in touch with us.

Upon request the Gasket Indenter can be also fitted with diamond anvils.


Material AISI 316
Press type Screw driven
Force range Max 9800 N
Dies material Tungsten carbide (diamond anvil option)
Dies culet size 0.20 to 0.90 mm
Dies design compatibility Diacell or Boehler-Almax
Gasket diameter 5 or 10 mm

Almax easyLab is committed to its policy of continuous improvement. Specifications may change without notice. easyLab and Diacell are registered trademarks of Almax easyLab.


We have compiled a series of technical documents (brochures, articles, technical drawings, …) which you might find useful to help you understand this product better.

Technical documentation

Brochure Gasket Indenter



How do I chose the culet size for the die?

Anvil Culet size (µm) 200 300 400 500 600 800 1000
(*) WC Dies culet size (µm) 150 250 350 450 550 750 950

(*) With the gasket indenter, it is always better to have a die with a smaller culet (usually by 50 µm). The Gasket Indenter is then used mainly to extrude most of the metal during the indentation process. The gasket with a round indented mark and indented to a thickness of around 100 µm is then placed in the DAC and the diamond anvil just needs to make a small mark of its 16 facets in the metal left around the pre-indented mark.


There are no reviews yet.

Be the first to review “Diacell® Gasket Indenter”

Your email address will not be published. Required fields are marked *

Share this product on:


Go to Top